View ChimneyRx items

  • Item: ChimneyRx Brushable Crown Repair
  SKU: SS92001  Q/A: data-sheet
  Size: 1-Gallon or 2-Gallon
  Appearance: Gray Brushable Paste
  VOC Content: NA g/L  
  Case Pack: 1-Gallon (4/case)
Case Pack: 2-Gallon (1/unit)
  Shelf Life: 18-24 months  
  UPC Code: 7-09057-92001-8 / 1-Gallon
UPC Code: 7-09057-92002-5 / 2-Gallon
  Quick Product Facts  

ChimneyRx Brushable Crown Repair is a fast setting elastic-like coating that forms a flexible waterproof membrane. Easily repair and protect chimney crowns from water intrusion with this specifically developed and easy to apply product and a 3 or 4 inch paintbrush. ChimneyRx Brushable Crown Repair is durable and needs no mixing or special bonding agents. The included Solvent free compounds do not cause unnecessary harm the environment.

  • Complete cure in 2 - 4 hours.
  • Easy brush-on application.
  • Permanently flexible
  • Environmentally friendly

" Stops water leaks and prevents chimney crown cracks. ChimneyRx Brushable Crown Repair is a fast setting elastomeric coating that forms a flexible waterproof membrane. It's specifically formulated to repair and protect chimney crowns from water intrusion. "

  ChimneyRx Brushable Crown Repair

ChimneyRx Brushable Chimney Crown RepairWhere to Use:
Chimney Crowns, Chimney Corbels, Tops of Masonry or Parapet Walls need a long lasting outer waterproof membrane. Use ChimneyRx Brushable Chimney Crown to make the necessary repair. Bricks laid in soldier patterns at the base of a window are an example of Masonry windowsills. This is a great application for ChimneyRx Brushable Chimney Crown as well.

Adjusting the Color:
Adding small amounts of standard mortar dye achieves custom coloring. Always transfer material for coloring from the original container into a clean mixing container when using dye and add the mortar dye one or two drops at a time. After mixing with a trowel or paddle, drill the product to its needed color.

What are the Coverage Rate(s):
Two coats of ChimneyRX Brushable Crown Repair will cover approximately 40 square feet per gallon depending on texture and porosity of surface to be coated.

When to Apply:
Surface and air temperature should be a minimum of 45°F at the time of application. Do not apply if temperature is expected to drop below 45°F within a 4 hour period. Do not apply to frozen or frost covered surfaces. Application must be to a clean, dry surface. Do not apply to wet or water saturated surfaces and/or when rainfall is expected within four hours unless adequate protection with a polyethylene film or its equivalent is provided.

How Long to Wait:
Dries to touch in 30 - 60 minutes. Product cures completely within 2 - 4 hours depending on temperature and humidity.

Tools You Will Need:
A 3 or 4 inch synthetic bristle paint brush.

Safety Precautions to Observe:
Proper safety procedures should be followed at all times while handling the product. Wear chemical resistant gloves and chemical splash goggles. 

Refer to the Material Safety Data Sheet for important health and safety information before use.

  Worth Quoting...  
" A major benefit of ChimneyRx Brushable Crown Repair is it's unique water based "quick dry" technology and it's great coverage rate. The product cures in 2-4 hours depending on temperature and humidity.  Whereas the coverage rate is roughly 40 square feet a gallon "
Copyright (c) 2002 - 2014 Small's Hardware Inc. All rights reserved. Privacy Notice | Contact Us
All trademarks and registered marks are the property of their respective owners.
DTEP is a registered trade name of Small's Hardware Inc. State of Ohio
Mailing Address • 109 S Wayne Ave • Lockland OH • 45215
Visit our StoreFront